| Detailed Introduce： Detailed Introduce：
Rated attack :
3.0-500 watts / sec (J). Full screen display (the largest) energy hundred Kung (%). Display accuracy of 0.5%. 0.1%--0.5% chosen energy resolution of the screen. Power voltage stability : Rated for +/-13% changes in the supply voltage, capacitor voltage setpoint can be maintained within the +/-0.25%. Display : 240X64 high-definition LCD screen used, debugging transparent. : : When the error amplifier control circuit voltage readings Chao, cut-off values required by charging circuit, connecting a resistor capacitor ends will be required to discharge the capacitance - voltage group level. District : Insensitive control circuit voltage of about 0.6% for the largest. Fault lines : This is a safety feature of relief when the input power suddenly cut off, a relief resistance automatically connected. to discharge capacitors. Ignition calling for the use of external ignition circuit inconsistent accounts : closure or low logic control circuits. Internal filtering device that prevents interference (RFI) aroused ignition. Workpieces can be set up to suppress continuous discharge and discharge nose repeatedly.
Supply Voltage :
Charging 220vac,50/60HZ,2635 watts, 35 watts standby. 2A stop devices when using 230v. Welding ignition lock : error in the charge and discharge the output of amplifier spacing to prevent ignition circuit This will help prevent the correct capacitors for power before recharging or discharge (welder) ignition. caused by the poor quality of welding effect. Time : Pre-programmable pressure environment and the non-manual and automatic welding head ignition pressure used together, ensure that the welding heat given before welding electrodes at the incident. preloading user programming time can be set (range 0.1-9.9 seconds).
Pneumatic control valve drive output : welding head of electromagnetic valves 24VAC,15 downs amp output.
Characteristics :
offensive output pulse rate output, and even the ends of a 0.01 ohm load sensors detected no pulse characteristics, In between the amplitude and the amplitude is measured pulse rise time, measured at 10% amplitude point between pulse width conflict.
|
The pulse transformer links |
Capacitor set |
Ascension time |
Pulse width
|
At the earliest stage pulse range |
|
Connect also(short pulse) |
6000mfd |
1.6ms |
6.8ms |
9.8v |
|
The string connects(long pulse) |
6000mfd |
9.2ms |
2.7ms |
7.3v |
Weld speed: Repeated velocity(Rep Rate), that is settle the foundation of hot rate in the system sum up, weld number of times every minute, average time of the in order to certain repeated frequency can long 20 minutes.Biggest break to weld velocity(Hit Rate) continuously, that is the power supply(machine) carry on welding not and in a row of speed.Suppose these weld to be carried on with single vein of, its craft index sign is:
|
The biggest energy percentage |
The repeated velocity welds number of times/minute |
Break to weld velocity to weld number of times/minute continuously |
|
2%以下 |
300 |
300 |
|
25% |
175 |
180 |
|
50% |
120 |
124 |
|
100% |
65 |
70 |
OVERALL DIMENSIONS Outer circle size Fuselage of airplane size: 310 (high)x280(wide)x430mm(long)
|
